SX-CRM10
SIGNUX CRM10
M10 parallel splitter, three or four outputs
It goes in through an M10 female connector and out through three or four M10 male ones, depending on the reference.
The outputs run in parallel, so each one gives what comes in: the four wires reach every connector at once and each keeps its contact. It neither separates nor switches anything.
- Input
- M10 female connector, 4 contacts
- Outputs
- 3 or 4 M10 male connectors, 4 contacts
- Lengths
- 150 · 200 · 250 mm
What sets it apart
Three outputs
Body of 51 × 24 mm and a 4 × 20 AWG, Ø 5.5 mm input.
Four outputs
Body of 65 × 40 mm and a 4 × 22 AWG, Ø 5.0 mm input.
Configurations
| Connector / output | Part number |
|---|---|
| M10 female to 3 × M10 male | SX-CRM10-3 |
| M10 female to 4 × M10 male | SX-CRM10-4 |
Specifications
Input
- Input
- M10 female connector, 4 contactsWith an O-ring and a Ø 14 mm cap
- Wires
- 4 × 20 or 4 × 22 AWGDepending on the reference
- Outside diameter
- 5.5 or 5.0 ± 0.2 mmDepending on the reference
- Length
- 200 ± 10 mm
Outputs
- Outputs
- 3 or 4 M10 male connectors, 4 contactsBody of 34 × Ø 10 mm
- Wires
- 4 × 22 AWG
- Outside diameter
- 5.0 ± 0.2 mm
- Lengths
- 150 · 200 · 250 mm± 10 mm; on the four-output one, two of 250
Cable and body
- Cable type
- UL2464, black PVCThe same on the input and on the outputs
- Body
- 51 × 24 or 65 × 40 mmDepending on the reference
Gallery
Documentation
Does it fit your case?
Tell us where the SX-CRM10 is going and what you need to integrate it with. We’ll tell you whether it’s the right device — and if not, which one is.